I have been playing with a new Triquint ULNA device (TQP3M9036). It
Shows a lot of promise. It is like a MAR or MSA device in that it is
50ohm in and out. and has a claimed NF about .4db nf ( their numbers).
I have built several pramps to test them and have gotten even better
than they claim and they cover 50-1296 with ease and NF is .4ish or
below. The S11 and S22 are both great and the OIP3 is +35db also
...very nice device. It has great promise as a good terrestrial LNA.
Preamps are foolproof to build and would cost under $50 if all the best
quality parts are used.
Just for information only ...
Pete WA2ODO
--
++++++CONFIDENTIALITY NOTICE++++++
The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.
Hi all,
I’m ready on 6cm with the same dish I’m using on 3cm.
Despite the strong local 5 GHz WiFi noise, had a nice 579/569 first QSO with this setup today with HB9Q, thank you Dan !
Setup is a 3.7m dish and 60W at CP feeder.
I can be QRV on 6cm or 3cm most of the days, skeds and tests are very welcome, as usual.
Vy 73
Bruce PY2BS
qrv 70cm, 33cm, 23cm, 13cm, 9cm, 6cm and 3cm.
Hello to Lunatics.
Owners of RAS 1deg. and RAS 0.5 deg. rotators and Rot2Prog controllers
can try my free Ras Moon Tracker program.
Program was fully tested with RAS 1deg. rotator by me, because I have
it and use it.
Program can be downloaded here :
https://1drv.ms/u/s!Auurs2F0cQKF1DSJ2vdO6JjJwEOX
Program do not required any installation, open archive and extract
program folder to ur C:\ or any other drive.
Best Wishes.
de 4z5cp
I stumbled on this site and discovered interresting things.
2m Dual-RX (Special RX converter for 2m adaptive (EME) receiving)
http://www.ha1ya.hu/htmkepek/dual_rx.htm
ME2-XP 2m dual RX (EME) transverter (The first dual RX color display
transverter on the World!)
http://www.ha1ya.hu/htmkepek/me2xp_spec.htm
Does anyone have feedback from one of these 2 devices?
It sounds interesting but I'm looking for someone who has this kind of
device to exchange feedback, especially with the use of MAP65 (setup -
configuration).
73 - Damien F5RRS
After using WSJT V9 for a few years I recently started using WSJT-X as a
second decoder. Sometimes it is better, sometimes not. It has the advantage
that it decodes when one station is calling another (V9 only does this for
strong stations).
One issue I am having is that the Average window in X sometimes shows
stations that I decoded way earlier...sometimes an hour or more earlier and
on a different frequency.
If I click Clear Avg or double-click Erase, the window clears. But a while
later, old decodes once again start to show up in the Average window.
V9 does not have this problem.
I have been using V2.0...today I moved to V2.1.2 and maybe that will be
better. Waiting for MR here.
Has anyone else experienced this behavior?
Does anyone know if that was a bug in the earlier version and fixed in
2.1.2 or can some one suggest what setting I may have set incorrectly?
Thanks & 73,
Doug K1DG
Hello fellow eme operators
I have acquired a nice 1.8 meter dish. Offset feed. It was part of a commercial k/u band satellite data uplink. Fiberglass. Cleaned up nicely. Shallow dish. The f/d is 0.65. Perfect for 10ghz as is.
But I want to first try it on 23 cm. I need advice on what feed to use. Offset. Circular polarization.
Need advice.
I am 80 years old and not likely to build a feed. What is available off the shelf?
Bill W3CJK FN41 Jamestown, RI
Hi all,
just for an info if you want to announce your
upcoming activity in ARRL EME Contest,
you can do it at: http://www.darkside.cz/eme.php
73 & cu in EME Contest on 70cm
Matej, OK1TEH
