I have been playing with a new Triquint ULNA device (TQP3M9036). It
Shows a lot of promise. It is like a MAR or MSA device in that it is
50ohm in and out. and has a claimed NF about .4db nf ( their numbers).
I have built several pramps to test them and have gotten even better
than they claim and they cover 50-1296 with ease and NF is .4ish or
below. The S11 and S22 are both great and the OIP3 is +35db also
...very nice device. It has great promise as a good terrestrial LNA.
Preamps are foolproof to build and would cost under $50 if all the best
quality parts are used.
Just for information only ...
The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.
I’m ready on 6cm with the same dish I’m using on 3cm.
Despite the strong local 5 GHz WiFi noise, had a nice 579/569 first QSO with this setup today with HB9Q, thank you Dan !
Setup is a 3.7m dish and 60W at CP feeder.
I can be QRV on 6cm or 3cm most of the days, skeds and tests are very welcome, as usual.
qrv 70cm, 33cm, 23cm, 13cm, 9cm, 6cm and 3cm.
Hello to Lunatics.
Owners of RAS 1deg. and RAS 0.5 deg. rotators and Rot2Prog controllers
can try my free Ras Moon Tracker program.
Program was fully tested with RAS 1deg. rotator by me, because I have
it and use it.
Program can be downloaded here :
Program do not required any installation, open archive and extract
program folder to ur C:\ or any other drive.
I stumbled on this site and discovered interresting things.
2m Dual-RX (Special RX converter for 2m adaptive (EME) receiving)
ME2-XP 2m dual RX (EME) transverter (The first dual RX color display
transverter on the World!)
Does anyone have feedback from one of these 2 devices?
It sounds interesting but I'm looking for someone who has this kind of
device to exchange feedback, especially with the use of MAP65 (setup -
73 - Damien F5RRS
After using WSJT V9 for a few years I recently started using WSJT-X as a
second decoder. Sometimes it is better, sometimes not. It has the advantage
that it decodes when one station is calling another (V9 only does this for
One issue I am having is that the Average window in X sometimes shows
stations that I decoded way earlier...sometimes an hour or more earlier and
on a different frequency.
If I click Clear Avg or double-click Erase, the window clears. But a while
later, old decodes once again start to show up in the Average window.
V9 does not have this problem.
I have been using V2.0...today I moved to V2.1.2 and maybe that will be
better. Waiting for MR here.
Has anyone else experienced this behavior?
Does anyone know if that was a bug in the earlier version and fixed in
2.1.2 or can some one suggest what setting I may have set incorrectly?
Thanks & 73,
after 2years with a lot of problems and frustration my second Edition
24ghz eme Station is qrv now.it is the same as 10ghz also ready for
working as a beacon. tech data: 3.7m dish, 110w at the feed,kuhne
transverter and preamp.permanent beacon operation will be not with the
twt, but with a transistor pa.for this ,the tx is switchable between
transistor pa and twt.for i do have only a 1w transistor pa ,i need some
help for buying a transistor pa with more power.if you need a
beaconsignal in the meantime please send a mail and if possible i will
run the beacon with the twt,but only for a limited time.of cause qso
partners are welcome too,but my cw is very poor.
ps not before moon has reached higher elevation
Hello EME community,
May I ask you all to help me with cleanng up the "no-active" list available on my website?
I presume there are several stations on this list, which need correction or even to be removed from this list.
Thanks in advance for you help,
Br. Jan, PA0PLY