I have been playing with a new Triquint ULNA device (TQP3M9036). It
Shows a lot of promise. It is like a MAR or MSA device in that it is
50ohm in and out. and has a claimed NF about .4db nf ( their numbers).
I have built several pramps to test them and have gotten even better
than they claim and they cover 50-1296 with ease and NF is .4ish or
below. The S11 and S22 are both great and the OIP3 is +35db also
...very nice device. It has great promise as a good terrestrial LNA.
Preamps are foolproof to build and would cost under $50 if all the best
quality parts are used.
Just for information only ...
Pete WA2ODO
--
++++++CONFIDENTIALITY NOTICE++++++
The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.
Hi all,
I’m ready on 6cm with the same dish I’m using on 3cm.
Despite the strong local 5 GHz WiFi noise, had a nice 579/569 first QSO with this setup today with HB9Q, thank you Dan !
Setup is a 3.7m dish and 60W at CP feeder.
I can be QRV on 6cm or 3cm most of the days, skeds and tests are very welcome, as usual.
Vy 73
Bruce PY2BS
qrv 70cm, 33cm, 23cm, 13cm, 9cm, 6cm and 3cm.
I stumbled on this site and discovered interresting things.
2m Dual-RX (Special RX converter for 2m adaptive (EME) receiving)
http://www.ha1ya.hu/htmkepek/dual_rx.htm
ME2-XP 2m dual RX (EME) transverter (The first dual RX color display
transverter on the World!)
http://www.ha1ya.hu/htmkepek/me2xp_spec.htm
Does anyone have feedback from one of these 2 devices?
It sounds interesting but I'm looking for someone who has this kind of
device to exchange feedback, especially with the use of MAP65 (setup -
configuration).
73 - Damien F5RRS
Hi mooners,
For 10Ghz only one preamp is available and we will close further production after delivering more then 100 pcs.
We expect a crowed band in the coming time,hi.
We are currently preparingthe first batch of a super LNA for 24Ghz with NF: 1.1dB
Furthemore we would like feedback for the design and production of an 24Ghz SSPA.
Design goal is: 10Watt rf out, Vdc: 15Vd and WG connections.We will design against a reasonable price but need your feedback.
Thanks in advance,
Jan PAoPLY
Hello Guys,
this is a reminder for the ARI EME Trophy 2019 Spring Section
Period:from 00.00 UTC of 11th May to 24.00 UTC of 12th May 2019
Bands: 144 - 432 MHz. 1.2 - 2.3 - 5.7 - 10 GHz.
You can find rules at this link:
http://www.eme2008.org/ari-eme/contest.html
It's appreciated the use of the log that can be downloaded from the site
All Stations that have participated in both sections will participate to
the final Trophy 2019 with the sum of the score obtained, the First
station in each category wil receive a Prize an Award to all participants.
Vy 73' de Enrico i5wbe
Hello everyone:
I seek to add a camera to the center of my EME array to know when it¹s
on/off the moon.
Requirements:
1. wired camera (not wireless nor Bluetooth),
2. CCTV type is OK if available
3. All weather capable 20 deg F through 110 deg. F
4. Reliable all the time
5. Monochromatic or color (either one) is OK
I recall there was some detail about viewing the moon that a certain focal
length (lens) is best and I¹d welcome (please) camera recommendations
available today.
Questions:
What specific camera manufacturer and model do you recommend?
What specific monitor (manufacturer and model) recommended?
What cable type is required? (impedance, number of conductors and gauge
for 150 foot or 48 meter length)
Thank you; very 73,
Dave KJ9I
The EMU1616 uses a single PCIe card slot in your computer . I have used
it with Windows 7 through Windows 10 with no issues ( your mileage may
vary). I replaced my my partially modified Delta44 with the EMU1616 and
saw a world of difference and now I am moved on to the UADC4, so I dont
need the EMU 1616.
Asking $250 plus shipping or trade for something interesting.
73
Les
W2LPL
Les
Dears EMEfans,
I invite you to send your log will be appreciated, also with only one
qso, end-time Monday June 18th.All format areaccepted, better if xls.
*
http://www.eme2008.org/ari-eme/contest.html
*
Best 73'sde EnricoI5WBE
A.R.I. - EME Manager Coordinator
