I have been playing with a new Triquint ULNA device (TQP3M9036). It
Shows a lot of promise. It is like a MAR or MSA device in that it is
50ohm in and out. and has a claimed NF about .4db nf ( their numbers).
I have built several pramps to test them and have gotten even better
than they claim and they cover 50-1296 with ease and NF is .4ish or
below. The S11 and S22 are both great and the OIP3 is +35db also
...very nice device. It has great promise as a good terrestrial LNA.
Preamps are foolproof to build and would cost under $50 if all the best
quality parts are used.
Just for information only ...
Pete WA2ODO
--
++++++CONFIDENTIALITY NOTICE++++++
The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.
Hi all,
I’m ready on 6cm with the same dish I’m using on 3cm.
Despite the strong local 5 GHz WiFi noise, had a nice 579/569 first QSO with this setup today with HB9Q, thank you Dan !
Setup is a 3.7m dish and 60W at CP feeder.
I can be QRV on 6cm or 3cm most of the days, skeds and tests are very welcome, as usual.
Vy 73
Bruce PY2BS
qrv 70cm, 33cm, 23cm, 13cm, 9cm, 6cm and 3cm.
Befefore I reinvent the wheel this spring and before I strip down my RAS,
has anyone out there fitted absolute rotary encoders of the MAB 25 style to
a SPID RAS and more importantly documented it?
Also if anyone has stripped down and rebuilt a RAS I'd be interested in any
tips, pitfalls and gotchas.
I used to regularly strip down and rebuild a a Suzuki T500 charger engine
in my youth,so I'm not scared to have a go but I had a Haynes manual!
You could save me a lot of time and headscratching.
Also an exploded diagram of the rotator would be nice
Answers on a postcard to.......
73
John G4BAO
Hi all,
I also missed a lot of sleeping as most of you ;-)
Made 19 analog qso's during those long two nights. Got a ssb contact
with PI9CAM when they tx with 50 watts or less. Nice!
Spent a lot of time looking for more stations, but maybe low activity
during my window.
Additionally made 9 jt qso's, 6 of them new contacts. Some of them could
be worked in cw as well.
Had some probs with defective contacts of my control cables and lost a
preamp. But no matter it was really funny.
Will not party in the contest because of the ARRL rules.
Hope to work you soon!
73, Slawek dl6sh
www.dl6sh.com
Hello Microwavers
We had a successful demonstration of 3 cm EME at the Microwave Update
Conference in St. Louis, MO on Oct 13, 14 and 15. I was located in EM48ss in
the hotel parking lot. The antenna was a 1 m offset fed dish made by
Winegard. Power was provided by a GaN device delivering 30 watts to the
feed. I used a KX-3 IF and DEMI transverter locked to a 10 MHz Isotemp TCXO.
I was not able to take advantage of measuring moon noise as a pointing
assistance as there was a local beacon up the band that was getting into my
GR-1216 noise meter. I plan to look into better ways of measuring moon noise
over narrower bandwidths ...However I drug out the compass and was able to
get reasonably close on azimuth and when we started hearing stations we
could easily optimize the dish and establish a new azimuth reference. The
theoretical 3 dB beamwidth of the 1 m dish at 10 GHz is 2.2 degrees. My dish
mount is calibrated in 1 degree increments making it easy to update once we
find the moon. Elevation readout was provided by a Sears digital level
placed on the offset dish feed support. Based on prior sun noise
measurements, I determined that the arm angle was 3 degrees below the actual
pointing angle of the dish. I requested that other stations who wished to
call me do the mutual Doppler correction on both receive and transmit so
that I could receive and transmit on 10368.050 MHz.
On the first moon rise, we did work on JT-4F G3WDG at 2257Z, OZ1LPR at 2305Z
and OK1KIR at 0042Z, We attempted contact with K5GW on cw but it was
confirmed later that Gerald had some tracking program issues and we gave up
for the night. The attendees were able to copy K5GW calling us on cw so that
provided a good demo to the guys. The tones from the other 3 stations were
also heard in the loudspeaker. so despite the fact that we had to manually
(with some luck) keep it on the moon without the help of moon noise, we did
have success.
On the second night, we had a repeat QSO with G3WDG at 2342Z (thanks Charlie
as you confirmed we were on the moon) and WA3LBI at 0023Z. I then ran a sked
with K5GW with me doing the mutual Doppler correction on both receive and
transmit and we established contact by 0130Z. We then went back to CQing on
.050 hoping for further contacts. We were surprised and pleased to make a
contact with G4CBW at 0135Z who was only running a 1.5m dish. We finished
the evening with a nice contact with OK1CA.
Thank you to the stations we worked and my friends who helped me with setup
and teardown.73 de W5LUA 10/17/2016
As the VHF manager who organised the VHF theme at the RSGB convention I would like to publically thank Peter for another really inspiring talk.
Some 45 years ago as a young amateur I went to a talk by Peter on EME at a RSGB convention in West London. As a result of Peter's talk I was hooked on EME for life.
On Saturday, after Peter's talk, I was aproached by a young amateur in his early 20s who had never seen anything about EME before. As a result of Peter's talk, which focused on 5.7GHz EME, this young man told me that was what he really wanted to do in amateur radio. This is a story that many others in the UK will also recognise.
So Peter again, "thank you" - 52 years of EME and still inspiring newcomers.
73
John G4SWX
Date: Mon, 10 Oct 2016 16:04:45 +0100
From: "Peter Blair" <g3ltf(a)btinternet.com>
Subject: [Moon-Net] My talk on 6cm eme at the RSGB convention
To: "Moon-Net" <moon-net(a)mailman.pe1itr.com>, "freetalk moonnet"
<moon(a)moonbounce.info>
Message-ID: <B51196F09DAE424792422A8D3ED32BD8@PeterKBlairPC5>
Content-Type: text/plain; charset="iso-8859-1"
My thanks to everyone who sent me pictures, notes etc for this talk It was well received and I understand that there will eventually be film of it and all the talks at the convention on you-tube. I wasnt able to use all the material but the support I received from you all in the 6cm community was terrific. Thankyou again.
73 Peter G3LTF
Hi Frank, thank you for your comments.
You are right, I am using a TS-2k, and at the time of failure I had a
6dB attenuator in line.
Now, ……..waiting for new part to arrive. That is boring :-)
73
Geir
LA6TPA
On 25.02.2017 22:19, PA4EME wrote:
> Always bad news....
>
> These devices are very rugged but very sensitive to too much input
> power. Lesson learned myself .... don't go any further before you are
> absolutly sure that your driver/transceiver does not have any
> powerspikes at beginning of transmission when power is reduced. Best
> way to lose power is by dropping it in attuator/lossy coax. As I
> believe to have rwad on your webpage you are using a TS2000 which is
> know to have the "power-spike dissease".
>
> Good luck in repair!
>
> Frank, PA4EME
>
> Op 25/02/2017 om 18:17 schreef Geir Aarnes:
>> I was planning to put my new 144 SSPA on the air this weekend, but………..
>> Last night, during light burn-in tests, the amplifier suddenly
>> dropped gain.
>> No alarms, no nothing, but one of the MOSFETS was drawing a lot less
>> current compared to the other, it was also operating in class C. It
>> turns out that for some reason the gate2 on the failing MOSFET has
>> broken down. DAMN!!!!!!!!
>> Some pix @ my site http://la6tpa.com
>>
>>
>> _______________________________________________
>> Moon-Net posting and subscription instructions are at
>> http://www.nlsa.com/nets/moon-net-help.html
>>
>
>
Hi All,
I have for sale a PA for 23cm made by Marko LZ2US, using TH327.
The PA is practically unused and has never transmited. It was part of my project of setting up a 23cm eme station at my summer QTH but I have no time to be there at all but 1 week per year, so it was never completed. It is not worth having it there and never using it so i decided to give it a way.
Here are the specs:
RF DECK
Tube :TH 327
Freq :1296MHZ
Output : >2000 Wattas
Gain App. :9dB
Efficiency App. :32% linear Mode
Voltage :220-240 Volt
Size :65x33x30cm
Weight :45Kgs
POWER SUPPLY
Voltage :3 phase 380-405 VAC
Size :48x42x22cm
Weight :60Kgs
Will be delivered in a wooden box.
I am asking Euro 1,000 + shipping from Athens to anywhere you like, preferably within EU. If there is a good home for this nice PA, please email me direct.
Pictures are available upon request.
tnx
Costas
SV1OAA
