I have been playing with a new Triquint ULNA device (TQP3M9036). It
Shows a lot of promise. It is like a MAR or MSA device in that it is
50ohm in and out. and has a claimed NF about .4db nf ( their numbers).
I have built several pramps to test them and have gotten even better
than they claim and they cover 50-1296 with ease and NF is .4ish or
below. The S11 and S22 are both great and the OIP3 is +35db also
...very nice device. It has great promise as a good terrestrial LNA.
Preamps are foolproof to build and would cost under $50 if all the best
quality parts are used.
Just for information only ...
Pete WA2ODO
--
++++++CONFIDENTIALITY NOTICE++++++
The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.
Hi all,
I’m ready on 6cm with the same dish I’m using on 3cm.
Despite the strong local 5 GHz WiFi noise, had a nice 579/569 first QSO with this setup today with HB9Q, thank you Dan !
Setup is a 3.7m dish and 60W at CP feeder.
I can be QRV on 6cm or 3cm most of the days, skeds and tests are very welcome, as usual.
Vy 73
Bruce PY2BS
qrv 70cm, 33cm, 23cm, 13cm, 9cm, 6cm and 3cm.
Hi all,
check out http://www.darkside.cz/eme.php
By the way I'll not take a part this time because of
IARU R1 UHF/SHF Contest. I'll be running
this UHF Contest with my club OK2A on 70/23/9/3cm.
73
Matej, OK1TEH
This weekend I operated 6cm using just 16 Watts to a 1.9m PF dish with an
SM6FHZ septum feed (kindly loaned to me by G3LTF) On RX, a single stage
0.9dB LNA based on a "Franco" LNB board. See RSGB RadCom "GHz Bands" column
July 2014 for details.
I had 7.5dB sun noise and 0,25dB Moon noise.
On CW I worked OK1KIR, HB9Q and DF3RU. "Gotaways" on CW were OK1CA, OF2DG,
ES5PC, PY2BS all identified calling CQ. I need more power!
On JT4F I worked HB9Q, OK1KIR, OK1CA UA3PTW, OZ1LPR and PY2BS.
A good start to the 6cm project at G4BAO. Watch this space, more power
planned!
73 John
Gotit working with help, thanks.
One question remains however.Can I get rid of the center carrier which shows up on the waterfall screen?
If so what do I need to do?
Tnx Jan
Date: Tue, 31 Oct 2017 16:48:15 -0400
From: Tim Barefoot <barefoot.tim(a)gmail.com>
To: moon-net(a)mailman.pe1itr.com
Subject: [Moon-Net] SDRPLAY
Message-ID: <3EB26A84-0FB7-44D1-85AF-FBCE0FB86B97(a)gmail.com>
Content-Type: text/plain; charset=us-ascii
Our club is setting up for EME on 1296 from our clubhouse in FN-10pa. We
are getting close. My question is will Map65 work with SDRPLAY RSP2
Sent from my iPhone
******************************************
Yes it will. You can use HDSDR -> VAC -> MAP65 (I do that myself now and
then)
73 de SM7SJR, Bjorn
Our club is setting up for EME on 1296 from our clubhouse in FN-10pa. We are getting close. My question is will Map65 work with SDRPLAY RSP2
Sent from my iPhone
